- 1 How does AM demodulation work?
- 2 What is FM modulation and demodulation?
- 3 Which is better AM or FM?
- 4 Where AM and FM are used?
- 5 What demodulator is used for FM?
- 6 What is the disadvantage of FM over AM?
- 7 Which device did we use for AM demodulation?
- 8 What are the types of FM?
- 9 What is bandwidth in FM?
- 10 What is difference between modulation and demodulation?
- 11 What is the advantage of FM over AM?
- 12 Does AM or FM travel further?
- 13 What do AM and FM stand for?
How does AM demodulation work?
The synchronous AM demodulator uses a mixer or product detector with a local oscillator signal. The local oscillator signal is synchronised to the incoming signal carrier so that it produces no beat note with the incoming carrier. The sidebands of the AM signal are then demodulated to provide the required audio signal.
What is FM modulation and demodulation?
FM demodulation is a key process in the reception of a frequency modulated signal. Once the signal has been received, filtered and amplified, it is necessary to recover the original modulation from the carrier. It is this process that is called demodulation or detection.
Which is better AM or FM?
” FM, which stands for Frequency Modulation, has better sound quality due to higher bandwidth. Also, the way the audio is encoded for FM makes it less sensitive to interference from electrical activity from storms or electrical devices than AM.
Where AM and FM are used?
In FM, a radio wave is known as the “carrier” or “carrier wave” is modulated in frequency by the signal that is to be transmitted. The amplitude and phase remain constant. AM is a technique used in electronic communication, most commonly for transmitting information through a radio carrier wave.
What demodulator is used for FM?
Quadrature Detectors The quadrature detector is probably the single most widely used FM demodulator. It uses a phase-shift circuit to produce a phase shift of 90° at the unmodulated carrier frequency. This detector is primarily used in TV demodulation and is used in some FM radio stations.
What is the disadvantage of FM over AM?
Explanation: The disadvantage of FM over AM is that in frequency modulation large bandwidth is required. While, in case of advantages, FM is less prone to noise interference and has lower power consumption compared to AM. So it is only used in frequency modulation and not in amplitude modulation.
Which device did we use for AM demodulation?
A diode detector is the simplest device used for AM demodulation.
What are the types of FM?
There are two different types of frequency modulation used in telecommunications: analog frequency modulation and digital frequency modulation.
What is bandwidth in FM?
FM radio uses frequency modulation, of course. The frequency band for FM radio is about 88 to 108 MHz. The information signal is music and voice which falls in the audio spectrum. If FM transmitters use a maximum modulation index of about 5.0, so the resulting bandwidth is 180 kHz (roughly 0.2 MHz).
What is difference between modulation and demodulation?
The key difference between modulation and demodulation is that modulation is done at the transmitter side while demodulation is done at the receiver side of a communication system. Modulation is basically done to transmit data to longer distance whereas demodulation is done to regain the original message signal.
What is the advantage of FM over AM?
The main advantages of FM over AM are: Improved signal to noise ratio (about 25dB) w.r.t. to man made interference. Smaller geographical interference between neighboring stations. Less radiated power.
Does AM or FM travel further?
FM radio waves also travel horizontally and skyward. However, due to the higher frequency of the carrier waves, the waves that go skyward are not reflected. They pass through the atmosphere and into space. Although AM waves can be received at greater distances than FM waves, FM.
What do AM and FM stand for?
AM and FM modulated signals for radio. AM (Amplitude Modulation) and FM (Frequency Modulation) are types of modulation (coding). The electrical signal from program material, usually coming from a studio, is mixed with a carrier wave of a specific frequency, then broadcast.