Readers ask: Am Fm Receiver With Turntable?

What is a good receiver for a turntable?

Best Receivers for Turntables Reviews

  • Yamaha R-S202BL Stereo Receiver – BEST OVERALL.
  • Sherwood RX4508 – EASIEST TO USE.
  • Marantz PM6006 – BEST MULTI-TASKER.

Is it bad to put turntable on receiver?

Most stereo receivers have the transformer on the left side, so putting the turntable on the right side of the receiver is recommended. We strongly recommend not placing your turntable on top of your receiver – this can cause buzz issues and may also prevent your receiver from getting proper air flow.

Do I need a stereo receiver for my turntable?

In order to connect various video and audio components to a speaker you generally need a receiver. It has inputs for the different components and an output for the speakers. The receiver allows you to connect your turntable, record player, CD player, TV, etc.

You might be interested:  Am Fm Cd Player?

Can you hook a turntable to a radio?

To connect a turntable to a stereo system, the stereo system should have a PHONO input. If a PHONO input is not available, the turntable must have a built-in amplifier or an in-line amplifier must be used to connect the turntable to another input on the stereo system.

Can I connect my turntable directly to speakers?

You can connect your turntable directly to speakers if, and only if, your turntable ha s a built-in preamp and your speakers have a built-in amplifier. But if your turntable only has a PHONO output it will need to be hooked up to an external preamp. Or to a receiver with a preamp built in.

Are old stereo receivers worth anything?

If you’re interested in selling your old stereo equipment, remember, they aren’t all worth lots of money. As a general rule, most transistorized equipment — mainly receivers from the 70’s and 80’s — are not worth as much as you’d like them to be.

Why am I getting feedback from my turntable?

When a turntable is set up correctly, the stylus only picks up the vibrations caused by the stylus on the record. Feedback occurs when another source of vibration is present. This causes the stylus to pick up the vibrations caused by the speakers, resulting in a feedback loop that can get louder and louder.

How far should a turntable be from a speaker?

Speakers should be placed so that their initial distance between them is 150cm MINIMUM. Mutual distance is always calculated from the middle of the bass unit on one speaker to the middle of the bass unit on the second speaker.

You might be interested:  Question: Am Fm Stereo System With Exteranl Antenna Or Cable Port?

Can you stack a turntable on an amplifier?

An amp is not a good, stable base to place a turntable on. Any parts of the amp that the speakers can make resonate – even slightly – will travel up into the turntable.

What is the difference between Aux and phono?

A turntable produces a PHONO output signal. This phono signal needs to be converted to a LINE LEVEL signal (sometimes referred to as AUX signal) to work with audio equipment including stereo systems, computers, and speakers. A phono preamp converts PHONO to LINE LEVEL.

Can I use a turntable without an amp?

Yes. A turntable must be connected to an amplifier as the output signal is not strong enough to drive speakers. So if you have a turntable with a built-in preamp and also have speakers with a built-in amplifier, then you connect the two without the standalone amplifier.

Do you need a receiver with a Bluetooth turntable?

A Bluetooth turntable is a turntable that connects to a stereo, powered speakers or headphones wirelessly. You will need powered speakers with Bluetooth to connect a turntable wirelessly. Or a stereo receiver, Hi-Fi system, or headphones with Bluetooth capability.

Can you connect a turntable to AUX?

This turntable has a built-in phono preamp. Simply plug the turntable’s audio signal cable into one of the receiver’s analog audio inputs. These inputs are oftentimes labeled Aux (auxiliary), Line In, Analog In, etc. You can even use your receiver’s “CD” or “Tape” input, if needed.

Can I use aux input for phono?

Can I use the aux input for phono? Yes, the aux input on a receiver can be used for phono, but only if you use a stand alone phono preamp for your turntable or if your turntable has a built in phono preamp.

You might be interested:  FAQ: How To Build A Better Fm Antenna?

Does a turntable need a preamp?

If you want to hook your record player up to external speakers or audio systems, you need a preamp. Some turntables contain internal preamps. So do some of the components you might want to connect to your turntable, like a receiver or amplifier. If that is the case, you won’t need to buy an additional preamp.

Leave a Reply

Your email address will not be published. Required fields are marked *